KUZMA Stabi S 2018 MASS LOADER + Rega RB330 + Dynavector DV10X5
KUZMA STABI-S Turntable Set
+ Kuzma Stabi S Turnatable
+ Rega 300 series Tonearm
+ Dynavector DX10X5 MC Cartridge
Having tested a variety of entry hi-end concepts we came to a conclusion that none gets close to Stabi-S combo. Solidity , dynamics and resolution provided by ingeniius design of turntable motor and brass plinth are completed with high quality Rega Tonearm which sounds best with japanese Dynavector Moving Coil Cartridge. It simply doesnt get any better then that.
Stabi S is our smallest turntable with a design approach normally found only in more expensive models. Its unique shape and construction of solid brass rods, provide an extremely rigid connection to platter, bearing and tonearm support. There is no flat plate to resonate and transmit vibrations, only solid brass rods 50mm in diameter. A second brass rod provides stability and the two are clamped together in a T shape. The motor is housed independently in its own bras tower which dampens vibration of the motor itself. A ground, flat belt provides drive from the motor pulley to the subplatter.
The bearing is of highly polished, fine grain carbon steel with a one point contact, while the bearing sleeve is of a resin/textile material which has excellent damping, non-resonant properties.
With a mat on top and rubber damping insert underneath, the sold aluminium platter provides a stable non-resonant platform for records.
An acrylic cover protects platter and tonearm while reflecting the turntable’s original shape. A 45 rpm adaptor is provided and is simply slipped over the 33 rpm pulley. The turntable can accommodate various tonearms by the use of different pre- cut brass plates and it allows for VTA adjustment on any tonearm mounted.
The whole turntable is supported by an optional high density plywood plate.
A BRAND-NEW item
Offers and product information:
( 0048 ) 515 338 633
- Wymienna igła : nie
- Pokrywa : tak
- Prędkość obrotów : 33,33 rpm / 45,11 rpm
- Zasada działania : MC
- Gniazdko RCA : nie / stały kabel RCA
- Zalecana siła nacisku : 1,8g - 2,2g
- Separacja kanałów przy 1 kHz : 25dB
- Napięcie wyjściowe : 2.5 mV
- Typ igły : Eliptyczna
- Pasmo przenoszenia : 20-20.000 Hz + 2 / - 2 dB
- Ramię : RB303
- Masa : 13 kg
- Zawieszenia : 1/2
- Waga talerza : 4 kg
- wkładka : Dynavector DV 10X5 MC